Author: Jim

Video Editor at AIB-TV Atlanta and lover of all things car
Posted on

For Reference: Airkewld Chassis Build

I’m posting this here as my aspiration for a rolling chassis.

I’ll be a happy old man if I can get my chassis to look like this. I think I can. It only takes money, right? Here’s a list of installed parts from Airkewld themselves.

Stage 2 PRObuilt Beam – https://www.airkewld.com/Stage-2-PRObuilt-Air-Ride-Beam-Complete-2202-p/2202.htm

GEN 2 BAD Series Disc Brakes – https://www.airkewld.com/Classic-VW-Front-Disc-Brake-Kit-4150G2-p/4150g2.htm

PRObuilt Transaxle – https://www.airkewld.com/PRObuilt-Transaxle-Performance-Short-Axle-2310-p/2310.htm

GEN 2 BAD Series Disc Brakes for the rear – https://www.airkewld.com/Classic-VW-Rear-Disc-Brake-Kit-4700G2-p/4700g2.htm

PRObuilt Pedal Assembly – https://www.airkewld.com/OEM-PRObuilt-Pedal-Assembly-Service-1450-p/1450.htm

Seat Belt Anchors – https://www.airkewld.com/Seat-Belt-Reinforcement-Kit-p/2707.htm

Chassis Inspection plate – https://www.airkewld.com/Chassis-Inspection-Plate-Kit-2701-p/2701.htm

Stainless Steel Chassis Fastener Kit – https://www.airkewld.com/Complete-Stainless-Chassis-Fastener-Kit-2920-p/2920.htm

Six Shooter – https://www.airkewld.com/Six-Shooter-Clutch-Adjustment-Nut-p/2820.htm

Posted on

Airkewld’s Stainless Steel Fuel Hardline

I’m adding this to my to get list. It looks cool and it’s a good idea.

Airkewld’s Stainless Steel Hardline system is here, and you immediately have faith in your fuel system.

The kit comes pre-bent with stainless steel .375″ tubing that can be cut to length to fit your application. This will do all the fuel lines needed in the engine bay that is not running a stock fuel pump application. You will need a soft line from the back of the tin union to the chassis fuel line outlet.

The kit comes with everything you see in the picture in blue.


Carb Bolts/Washers
Banjos
B nuts
Sleeves
Tee
Gauge adapter
Liquid filled psi gauge
Tin union with nut
2x mandrel bent carb lines
1x center line
1x drop down line


You will need a cutting device of some kind, we recommend a tubing cutter. You will need a 37 degree flaring tool as well. Check our tool section if you don’t already have them.

Dellorto (12mm Banjo Bolt) Hardline Fuel Line Kit – 8080

Dellorto (7mm Banjo Bolt) Hardline Fuel Line Kit – 8081

IDA Weber Hardline Fuel Line Kit – 8082

IDF Weber Hardline Fuel Line Kit – 8083