I’m adding this to my to get list. It looks cool and it’s a good idea.
Airkewld’s Stainless Steel Hardline system is here, and you immediately have faith in your fuel system.
The kit comes pre-bent with stainless steel .375″ tubing that can be cut to length to fit your application. This will do all the fuel lines needed in the engine bay that is not running a stock fuel pump application. You will need a soft line from the back of the tin union to the chassis fuel line outlet.
The kit comes with everything you see in the picture in blue.
Carb Bolts/Washers
Banjos
B nuts
Sleeves
Tee
Gauge adapter
Liquid filled psi gauge
Tin union with nut
2x mandrel bent carb lines
1x center line
1x drop down line
You will need a cutting device of some kind, we recommend a tubing cutter. You will need a 37 degree flaring tool as well. Check our tool section if you don’t already have them.
Dellorto (12mm Banjo Bolt) Hardline Fuel Line Kit – 8080
Dellorto (7mm Banjo Bolt) Hardline Fuel Line Kit – 8081
IDA Weber Hardline Fuel Line Kit – 8082
IDF Weber Hardline Fuel Line Kit – 8083