Thinking about going this route for power.
https://www.cbperformance.com/ProductDetails.asp?ProductCode=1187
Features
- 1187 – 220 HP 2387cc Builders Choice Engine Kit includes:
- 2298 – Eagle Drag Race Camshaft (FK-89)
- 1274 – AS41 Dual Relief Super Case – T-1 & 2, 84 x 94, Full Flowed
- 2665 – Super Race Rods (Chevy Journal) 5.5″ length (set of 4)
- 1859 – Maxi 30 Full Flow Oil Pump
- 1278 – CB High Performance Case Kit
- 1537 – 28mm Ultralight Lifters (set of 8)
- 1941 – Rear Main Seal – 13, 15, & 1600cc
- 1804 – Main Bearings STD
- 2672 – Clevite Chevy Rod Bearings
- 1399 – Straight Cut Cam Gears
- 1565 – Racing Push Rod Tubes (set of 8)
- 1409 – 044 Ultra Wedge Port Cylinder Heads (46×37) Stainless Steel Valves, VW650 Valve Springs & Titanium Retainers (94 bore)
- 1706 – 4 Quart Ultra Wide Glide Sump
- 1629 – Chromoly Tapered Push Rods
- 1037 – 94mm Wiseco Forged Piston Set – 94mm (set of 4) with XX Style Ring Pack (1 x 1.2 x 2.8)
- 1038 – 94mm Mahle Cylinders
- 1702D – C Channel Valve Covers (set of 2)
- 1424 – Main Bearing Dowell Pins (set of 5)
- 1998 – 10mm Deflector Plates – fits 13, 15, & 1600cc (set of 2)
- 1904 – Case Washer Set
- 1255 – Rubber-Coated Cam End Plug
- 2674 – Super Race Crank – 86mm Stroke – Chevy Journals
- 1390 – 94mm 0.060′ thick – Copperhead Gaskets (set of 4)
- 1303 – Forged Chromoly Lightweight Flywheel – 200mm (o-ring seal)
- 1360 – Racing Gland Nut with Washer
- 1223 – Cylinder Head Studs – 10mm Chromoly – Dual Port
- 1849 – Racing Camshaft Bearing Set
- 1918 – Crankshaft Gear Assembly Kit w/Racer Spacer NO CRANK GEAR
- 1577 – Forged 1.4:1 Rocker Arms w/.060 Rocker Shims
- 1362 – End Play Shim Kit
- 1908 – Case Lock Nut Kit
- 1973 – Gasket Set – 13, 15, & 1600cc Dual & Single Port Engines
- 1095 – Steel Barrel Spacers – 94mm x .185″ (set of 4)
- LABOR-CC-CS – CC Heads to 53cc
- LABOR-FLOW – Full Flow Case
- LABOR-CCS – Convert Case 8mm to 10mm Case Savers
- LABOR-CFS – Clearance Cam For Stroke
HP rating is based on Dual 48mm IDA Carbs, 1 3/4″ Merged Exhaust (#3597), match ported big beef manifolds, compression is set at 10.5:1 using listed parts in kit. Premium fuel is required for this kit.
