Removing the four 10mm bolts from the front glass. Be careful. There’s a tech article on here somewhere where I believe it states more than a half turn pass snug on those top bolts equals BOOM!
Looks like I’m going to have to drill out most of the 8 total screws due to rust.
…aren’t looking bad. They seem to be straight and the rust isn’t too bad.
I pulled off some trim only to expose more rust.
The passenger side window looks nasty.
Speaking of, I pulled off some trim piece from the inside of the window… and destroyed it.
Here’s a reference picture of the drivers side to hopefully make the future easier.